Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts
Sunday, December 9, 2018

DIY Flocked Pinecone Winter Wreath Tutorial


I LOVE making wreaths! They are such quick, fun activities and you always end up with such a lovely product to pretty up the house. This wreath is so quick and easy to make, the total assembly time was under 30 minutes! I love that this wreath isn't Christmas specific and can be used all winter long! Read on to find step by step DIY directions for this gorgeous winter wreath!




Materials

- Flocked Greenery Wreath
- Floral Wire
- Thumb Tacks
- Long, Natural Pinecones
- Wooden Initial

 Step 1: Hammer thumb tacks into the top and bottom of the back side of your wooden letter.

Step 2: Wrap floral wire around each of the thumb tacks on your wooden letter.

Step 3: Use the floral wire to attach your wooden letter to the center of your wreath.

Step 4: Arrange the pinecones around the wreath as you like. I attached mine so that they were all facing the same general direction. Use the floral wire to attach the pinecones to the wreath in the same manner as you attached the wooden letter.

And that's it! Hang, and enjoy! Such a quick and easy wreath that is so gorgeous. It's neutral and has natural elements, which makes it perfect for literally any decorating style. So in love!

I hope you enjoyed this tutorial! Let me know if you try it!
With Love, Katie

Sunday, November 26, 2017

How To Create Your Own DIY Ornament Wreath

 
This Christmas (or Hanukkah) ornament wreath is so stunning and opulent, but also so easy, quick and inexpensive! Could there be a more perfect DIY project than that? I absolutely love creating these wreaths and have made many over the years in different sizes and different colorways. They only take an hour or two to make (depending on how big you choose to make your wreath) which makes them perfect for a quick evening crafting session (and also makes them perfect to create as a gift!).

The trick to making these ornament wreaths look so full and lush is making sure you have ornaments in at least 3 different sizes so you can fill in any gaps between the larger ornaments with the smaller ones. Shatter proof ornaments in this wreath are also key, which makes them safe to hang either indoors or out (and also makes them cost effective to create). Read on for a list of materials and step by step instructions so you can make your own gorgeous ornament wreath in colors to match your own decor!

 

Materials

  • 14 inch diameter styrofoam wreath form
  • 15 foot tinsel garlsnd
  • Flexible Wire, for affixing to the wreath to hang
  • Glue Gun
  • Glue Sticks
  • 65 Large Ornaments (I used a pack of 50 which included about 6 colors as well as a pack of 15 "special ornaments" in an accent color, some with interesting textures but in the same large size)
  • 25 Medium Ornaments (for filling in medium spaces)
  • 30 Small Ornaments (for filling in small spaces and adding dimension to the finished wreath)


Affix flexible wire to wreath form. This will be how you hang your wreath when it's all finished!

 

Wrap tinsel garland around your wreath form, securing it with hot glue as you go. This step is important so what you glimpse is cheerful garland through any open spaces between your ornaments in your completed wreath, instead of the bland styrofoam wreath base. 


Begin adding ornaments by gluing large ornaments around the inside of the wreath. Turn the "stub" of the ornaments (the part you use to affix the ornament to an ornament hook if you were hanging it on a tree) under so you don't see them. Use the hot glue to affix the ornaments both to the tinsel base and to each other.


Next, add the large ornaments around the outside rim of the wreath, again affixing them to both the wreath form and adding dots of glue between the ornaments to secure them to each other (this will add stability to the ornaments on the finished wreath).


 Start to add large ornaments to the front of the wreath (the space between the inside and outer rings of ornaments). Don't be afraid to leave some space between the ornaments during this step as you will fill them in with the smaller ornaments later. Don't be too worried about making the ornaments look like they have been placed in a uniform matter during this step, it will look lusher and fuller when you start adding in the small balls, I promise!




Fill in any gaps between the large ornaments with the medium and small balls. This is the fun part! Use your eye to see which color should go where to create a balanced wreath. 

You're finished! Now hang and admire! I'll leave you with one last piece of advice, if you enjoyed making an ornament wreath this year be sure to head out the day after Christmas to nab those big boxes of shatterproof ornaments on an amazing sale. They will be perfect for you to make a new wreath next year!

I hope you loved this quick and easy DIY! I keep coming back to this instant gratification project year after year and I hope you do too. Before you leave, be sure to follow me on Bloglovin' so you never miss a post, and leave a comment to let me know if there's any Christmas DIY projects you particularly love!

With Love, Katie.




Wednesday, October 11, 2017

DIY Preserved Wedding Flower Shadowbox

Hey lovelies! I'm coming to you with my best and most precious DIY to date, a gorgeous shadowbox displaying some of my preserved wedding flowers! I absolutely adore my shadowbox. I think it looks so delicate and lovely, and is a perfect reminder of the beauty that surrounded me on my wedding day. I'm planning on including this piece in a wedding gallery wall, and I know that it will add so much texture and dimension to the collection of wedding day memories!

Before the wedding I looked extensively into bouquet preservation ideas. I thought of having them sent to a professional, being made into jewelry, pressed, preserved in resin, but in the craziness leading up to the wedding all of the plans I would have needed to put in place to preserve the flowers in those ways went by the wayside. It wasn't until the day after the wedding that I finally had a chance to google one last time to see what my options for preservation were. I landed on one of the easiest, most affordable, and as it turns out, most successful ways of preserving wedding flowers: Silica Gel.


Yes, silica gel, as in what comes in those little packets stuck into pockets of new clothes that say "DO NOT EAT." You can buy silica gel meant for preserving flowers very inexpensively (especially when considering the cost of professional bouquet preservation services, which cost HUNDREDS) on Amazon. The process of drying your flowers with the silica beads is very simple; all you do is layer the flowers with the silica beads until the entire flower is covered in an air-tight tupperware container, close the lid, and leave the tupperware containers alone for about 5 days (some of my dense roses needed a few extra days to dry completely, but most were dried in this time).


The picture above is what my flowers looked like at the END of the drying process. I used this silica gel method to dry flowers from my centerpieces but did the traditional "hang the bouquet upside down to dry" method for the flowers in my bouquet. I found that the flower dried with silica gel retained so much more of their original color (my flowers that were hung to dry are much more brown) and more of their original shape (where the flowers that were hung to dry look much more shriveled). Such incredible results for such a simple and inexpensive process!

Once your flowers are dried you can move on to the really fun part, arranging it into a shadowbox! After an extensive search the shadowbox I finally settled on is actually the inexpensive Ikea Ribba Frame. I chose this because my gallery wall is going to include a number of white gallery frames, which this will blend with perfectly, and because I thought the size was perfect;not too big, not too small, but plenty deep to accommodate for the layering of flowers in your display. It even comes with a mat that you can choose to put on top of your flowers if you want to make your flower display even smaller or give your shadow box a more traditional picture frame look.

Now that we have the two most essential ingredients lined up, your dried flowers and your shadow box, without further ado, here is how to make a gorgeous keepsake preserved wedding flower shadowbox!



Materials:

Directions

1.) Organize your dried flowers by type. I found this useful so all of my filler flowers, long stemmed flowers, and greenery that I had was easy to see making it easier to create a balanced composition in my shadowbox.


2.) Use the paper that comes in the Ikea shadowbox frame to trace onto your scrapbook paper or card stock. Cut out the scrapbook paper along your traced lines. You will use this paper as the backing for your dried flower display.


3.) Before you begin gluing, I recommend arranging your flowers onto the cardstock so you can get a general idea of the overall shape and design you are looking for. For me, after doing this step, I discovered I liked the look of the tall greenery all fanning out from the bottom center of the scrapbook paper.


4.) Begin using your hot glue gun to secure your flowers onto your scrapbook paper. I found I liked the look best when I applied many overlapping layers of dried flowers, and used smaller filler flowers to fill in most white spots so the scrapbook paper in the background was less visible. Don't be too generous with your hot glue during this step, the flowers are very light and only need a light touch to secure them to the paper or layers of flower underneath, and the overall look of your shadowbox will be better without obvious globs of hot glue peeking out.

So there you have it! A fun, easy, and inexpensive way to preserve and treasure your wedding bouquet or centerpiece flowers forever! Take my word for it when I say the pictures of this project really don't do it justice. The texture, color and dimension the shadowbox has in real life is absolutely stunning.

I hope this has inspired you to create something beautiful with your own wedding flowers after the big day! Let me know if you try this or have tried any other flower preservation techniques! As always, don't forget to follow me on bloglovin' so you never miss an update!

With Love, Katie
Monday, October 2, 2017

DIY Pottery Barn Inspired Halloween Crow Wreath


I love me some Pottery Barn. I've been on a real Pottery Barn kick recently, I think because I registered there for my wedding I got in the mood for their aesthetic recently. I've always coveted their Halloween items too, and I usually splurge on one or two each season!

This year they are selling this georgeous, rustic, simple bat wreath. I loved it the moment I saw it, but I also said to myself, I could make something even better. I love the look of the black bats arranged simply around a grapevine wreath, but in person I think the wreath lacks a bit of dimension; the bats sit very flat on the face of the wreath.


My version involves arranging feathered crows around the wreath. I love my version even more than Pottery Barn's because of the dimension the crows give to the wreath. Plus, it's a bit more realistic of a scene! You could definitely find crows perching on a bramble of branches on Halloween night!


I've made a few DIY wreaths in my day, and I have to say this is the easiest of all time! All it involves is purchasing your materials (very easy, I found them all at Michaels and they have these crows every year), and arranging your crows around the wreath. I used hot glue to permanently attach the crows in place, but if you prefer to have the option of removing the crows later, twist ties would work just as well.




Materials:

- 3 to 4 feathered crows. I found mine at Michaels for $6 on sale.
- 1 grapevine wreath. Mine is 18 inches. I got this for $2.50 at Michaels with a coupon.
- Hot glue or twist ties to secure crows to wreath.
- Pliers (optional)

Instructions:

- Arrange crows on wreath to your satisfaction. To make the crows each look a bit different, I recommend varying their posture, with some bending over, and some standing up tall.
- If your crows legs are wire, like mine were, using pliers to manipulate the wire to attach properly to the wreath can be helpful.
- Secure crows using either twisty ties or hot glue. Allow to dry.
- Display your gorgeous, spooky Halloween wreath! It's as easy as that!





The overall cost of my wreath was $20 for three crows and the grapevine wreath form. Not bad when you compare it to $60 full price for Pottery Barn's bat version! This is my type of DIY, super easy, which means super fun, and absolutely impossible to screw up while looking completely classy. It even beats the original in my book!

I hope you enjoyed this Halloween crow wreath tutorial! If you make this, it would totally make my year to see your version! Don't forget to subscribe to my newsletter and follow me on Bloglovin so you never miss an update!

With Love, Katie